FHWA Publication on Hollow Bar Soil Nails Review of Corrosion Factors and Mitigation Practice [Revised]

Document Info

Title: FHWA Publication on Hollow Bar Soil Nails Review of Corrosion Factors and Mitigation Practice [Revised]

Authored By: Naresh C. Samtani, PE, PhD, Edward A. Nowatzki, PE, PhD

Report Date: August 2010

Sponsoring Agency: Federal Lands Highway, Federal Highway Administration

 

Abstract

Hollow bar soil nails (HBSNs) have been used in the United States in earth retention systems for over 10 years. HBSNs are commonly used in place of solid bar soil nails (SBSNs) when the solid bar installation would require temporary casing of the hole. A state-of-the-practice document was prepared by FHWA in 2006 to identify (a) the various peculiarities of HBSNs in comparison with conventional SBSNs, and (b) areas of further research, evaluation and testing that would help agency personnel and design professionals understand the potential of HBSNs as a mainstream technology for permanent soil nail applications. This report concentrates on one of the specific areas of study identified in the 2006 report as related to development of corrosion mitigation guidance.

This report presents the results of an industry-wide survey including agencies, designers, consultants, manufacturers and contractors related to installation of HBSNs and practices with respect to corrosion aspects. Based on the responses it was found that a lack of guidance on corrosion protection is limiting the use of HBSNs for permanent applications in corrosive environments. There are numerous contributing factors that may lead to corrosion of HBSNs. These factors are identified in this report along with a review of the current corrosion mitigation guidance. Parameters to be evaluated in formal corrosion studies are outlined. Finally, recommendations for interim corrosion mitigation guidance and further studies are provided.

Disclaimer

The information presented in the blogs, downloads, or other locations of our website is for educational purposes only and is not intended to render engineering or other professional services.

Use of this information in whole or in part for design, construction or any other application is at the sole risk of the user. If such engineering or professional services are required, the assistance of an appropriate professional should be sought.

NCS GeoResources, LLC and/or NCS Consultants, LLC, shall not be responsible or liable in any way for any errors, omissions, or damages arising out of the use of the information provided or gathered in our website.