LRFD Article 1: LRFD for Substructures – Limit States and Interaction between Structural and Geotechnical Specialists

Document Info

Title: LRFD Article 1: LRFD for Substructures – Limit States and Interaction between Structural and Geotechnical Specialists

Authored By: NCS GeoResources, LLC

Report Date: May 2007

 

Abstract

The Load and Resistance Factor Design (LRFD) approach is currently being implemented across the United States, particularly in the realm of federally funded transportation facilities. The American Association of State Highway and Transportation Officials (AASHTO) recently released the 4th Edition of the LRFD Bridge Design Specifications (AASHTO, 2007). Starting October 1, 2007, the AASHTO-LRFD approach will have to be fully implemented by states seeking federal funding for new transportation projects.It is important that the structural and geotechnical specialists involved in the design of such transportation facilities properly understand the basics of the LRFD approach as included in AASHTO’s specifications.

In the context of bridge design, the substructure portion is considered to include all the elements below the level of the bridge bearings. The piers and abutments transfer the loads from the bridge bearings to the foundations. The way these loads are combined in the AASHTO-LRFD (AASHTO, 2007) approach and compared to resistances is significantly different from that in the Allowable Stress Design (ASD) approach in the 17th Edition of AASHTO’s Standard Specifications for Highway Bridges (AASHTO, 2002). This article briefly presents the concept of limit states in the AASHTO-LRFD framework, identifies the common limit states, discusses the basic concept of load combinations and finally provides some thoughts on the interaction between structural and geotechnical specialists in the design of highway bridge substructures. Readers interested in a primer on LRFD are referred to NCSG (2006).

Disclaimer

The information presented in the blogs, downloads, or other locations of our website is for educational purposes only and is not intended to render engineering or other professional services.

Use of this information in whole or in part for design, construction or any other application is at the sole risk of the user. If such engineering or professional services are required, the assistance of an appropriate professional should be sought.

NCS GeoResources, LLC and/or NCS Consultants, LLC, shall not be responsible or liable in any way for any errors, omissions, or damages arising out of the use of the information provided or gathered in our website.